1961 Gibson SG Special - Body Refin

1961 Gibson SG Special

*PLEASE NOTE* - we have photos of the internals of this guitar and more of the case but can't upload them due to photo limits on selling sites. Please visit our website or contact us to see more photos!!

VINTAGE VERIFIED, SETUP, AND
INSPECTED BY OUR TECH TEAM

Weight: 7.1lbs

Case Details: Original Hardshell Gibson Case

Cosmetic Condition: Good condition with plenty of play-wear and mojo. Good amount of scratching and dings throughout. Some of the dings on the back of the neck can be felt while playing. Please read through our tech notes/mods and repairs section below as there are some cosmetic details outlined below as well

Tech Notes: Guitar, Hardware, and Electronics were cleaned/tested and are functioning appropriately. Fretboard cleaned and frets polished. There is some fretwear throughout the fretboard, consistent with a guitar of this age. Doesn't have an impact on the playability of the guitar/bending strings. Setup with minimal neck relief and medium/low action. There is some lift on the end of the fretboard where it meets the neck pocket and you will notice some light fretbuzz on the high e string above the 17th fret. Tuning pegs are lightly bent on the Low E, D, G strings and the A string tuner is a little stiff. All the tuning pegs properly hold tune and function. Electronics appear to be all original.

Neck Pickup 7.80K Bridge Pickup 7.76K

Mods or Repairs: Fretboard binding missing on underside of neck. Fretboard binding missing above fret 18 on the topside of the neck. At some point in time someone tried to install some other bridge (see attached photos of small holes added for bridge polepieces). There is an Epiphone compensated bridge replacement where the original bridge existed. There was a crack you can see from the electronic controls around the side by the output jack that was re-glued and is structurally stable. Also appears in the past there was a break off on the upper horn which was rebuilt/glued back in place (see attached photos). Foam added under bridge pickup to raise up to a more appropriate height/volume. Added non-original strap button by neck. Body had been re-finished at some point, but the neck is original/untouched.

SPECIFICATIONS

Neck Profile: Slim C

Neck Thickness: 1st - 0.80" / 12th - 0.84"

Fingerboard Radius: 10"

Nut Width: 1 11/16"

Scale Length: 24 1/2"

Electronics Layout: 2 Volumes, 2 Tones, Standard 3-Way Pickup Switch

String Gauge: 10 - 46

Tremolo Bar: No